Image Labs International - ImageLabs Accessories

PO Box 1545
Belgrade, MT 59714
Phone: 406.585.7225
Toll Free: 800.785.5995
Fax: 406.388.0998

Home

Imaging System Components

ImageLabs Accessories

Engineering Solutions

Cables Lens Controllers

Lens Controllers - X2LC and V3LC and Software
Versatile Serial Controller for Motorized Lenses and Pan Tilts

Image Labs International, the imaging solutions leader, introduces a smart new addition to intelligent vision and imaging systems, the X2LC and V3LC lens controllers. These lens controllers allow computer control of most CCTV motorized lenses via a computer's standard serial port. Again, Image Labs leverages existing technology with its latest innovation to provide low-impact, high-tech solutions. We also have software for controlling the Fujinon PC lenses.

X2LC	V3LC
Features
2 axes motor control, typically zoom and focus, extremely small profile	Up to 8 axes , typically Zoom, Focus and Iris on one or two lenses, and 2 axes for Pan and Tilt
8 bit position readback accuracy	10 bit position readback accuracy
Timed and position control commands with speed control	Timed and position control commands with speed control.
Simple ASCII RS232 serial communications protocol and Ethernet (IP) control optional	Simple ASCII RS232 serial communications protocol. Option to allow multidrop RS485 communications with up to 16 units connected.
Includes libraries for C#, .NET, VB, C++, and easy to use interface for 8 channels	Includes libraries for C#, .NET, VB, C++, and easy to use interface for 8 channels
Runs off 6-12VDC (6VDC, 8VDC, and 12VDC models available)	Runs off 6-16VDC (12VDC typical)
4.5 x 1.75 x 1”	6.25 x 5.25 x 1.25”
Comes with 12 Volt, 0.8A supply	Comes with 12 Volt, 0.8A supply
2 year warranty	2 year warranty
Interface signals
Serial command port, 19200 baud (N/8/1)	Serial command port, 19200 baud (N/8/1)
Lens output of 2 motor control voltages. Specify control voltages of 6, 8, or 12 VDC.	Lens output of 8 motor control voltages, 6 axes allow PWM speed control, and 2 axes allow DC or AC directional control for pan/tilts. Optional analog output. Specify control voltages of 6, 8, or 12 VDC.
2 position inputs from preset-style pots	8 position inputs from preset-style pots

Compatibility:

The X2LC and V3LC lens controllers are compatible with lenses from

Cosmicar - P in suffix
ISO Rainbow - PZF or PZFI suffix
Computar - P in suffix
Chugai - P in suffix
Fujinon - Y41 or SNPY suffix
Navitar - contact ILI
And others.

Call for specifications or to allow us to configure a solution for you. Compatible with most lenses with presets or pots and 12 or 6VDC (+/-) or (+) DC control. (6V special version).

X2LC Data Sheet V3LC Data Sheet Software for Fujinon PC

Having difficulty deciding what works together?

Image Labs has onsite Vision System Engineers with whom you can discuss your total vision system installation. Call us at (800)785-5995 or our technical staff for more information.